How to clean the homogenizer head of high shear emulsifier
High - shear emulsifier is a machine that can shear materials at high speed.
It is a machine that is capable of fully refining and stirring materials evenly, that is, of high speed shearing and stirring and emulsifying materials.
Homogenizer head or homogenizer, emulsifier, is its core, so in use, maintenance, especially pay attention to the homogenizer cleaning and maintenance, down to see some cleaning and maintenance Suggestions!
the machine is not used or another material is to be replaced, in order
to ensure the cleanliness of the next batch of material production, the
homogenizer part should be cleaned as required.All
parts of the homogenizer in contact with the working fluid should be
cleaned as required, especially the cutting wheel, cutting sleeve,
sliding bearing and shaft sleeve inside the homogenizer, which should be
removed and cleaned before being installed.After
cleaning and reassembling, turn the impeller by hand, and there should
be no stuck phenomenon. After the two flanges of the pot body and pot
cover are relatively fixed, the motor of the inching homogenizer can be
turned correctly and there is no other abnormal condition, then the
operation can be started.In
addition, it should be noted that the homogenizer can not operate in
the empty state of the emulsifying pot due to high speed, so as not to
affect the sealing degree after local heating.