Installation points of vacuum emulsifying pot

- Oct 13, 2020-

After the enterprise purchases and receives the vacuum homogenizing emulsifier from the cosmetics equipment manufacturer, it must first check whether the entire body and accessories of the equipment are in good condition during the transportation process, and whether the motor is damaged, and then the vacuum homogenizing emulsifier should be inspected. Make sure that there are no metal scraps or other debris left in the equipment to avoid damage to the vacuum homogenizing emulsifier. At the same time, check the connection of the power switch to install a safe contact electrical device, after ensuring that there is no debris in the process pipeline of the vacuum homogenizing emulsifier, and the emulsifying pump is not damaged.

The installation position of the vacuum homogenizing emulsifier and the container should be kept vertical and horizontal. If the installation is inclined, it must be air-sealed, moisture-proof, dust-proof and explosion-proof. The choice of installation location and the nearest part of the container, such as the bottom of the container, make the pipeline simple and direct, and minimize the use of elbow pipeline components, thereby reducing the resistance of the material in the circulation process. Finally, the pneumatic power supply is switched on and off repeatedly to check whether the rotation of the motor is consistent with the rotation mark of the driving shaft. Reverse or idling is strictly prohibited.