Operation method of vacuum emulsifying pot

- Jun 02, 2020-

Operation method of vacuum emulsifying pot

The materials in the water pot and oil pot are heated and stirred for mixing reaction

It is sucked into the emulsifying pot by a vacuum pump. Through the center stirring in the upper part of the emulsifying pot, the PTFE scraper always caters to the shape of the stirring pot, sweeping off the wall-hanging sticky material, so that the included materials continuously generate new interfaces

After the blades and rotary blades are cut, compressed, and folded, they are stirred and mixed and flow down to the homogenizer below the pot body. The material then passes between the high-speed rotating cutting wheel and the fixed cutting sleeve. In the process of shearing, impact, turbulent flow, etc., the material is cut in the shear slit and quickly broken into 200nm-2um particles.

Because the emulsifier is in a vacuum state, the bubbles generated during the mixing process are pumped away in time.

38