semi-automatic round bottle labeling machine operation
First, the power and off
Check the fuse next to the power source and the power outlet. The fuse is 3A220V. Check if the power button is turned on.
Second, the labeling action is abnormal
Check whether the position of the label through the film is normal, if it is normal, check whether the operating mechanism is stuck, whether each spring is abnormal, and whether the position of the bottle is adjusted normally. Check whether the related photoelectric eye is normal.
Third, the motor does not run
Check whether the power supply and the electric eye of the bottle tester have detected a signal (you can see whether the controller indicates the time of the bottle test at the moment of placing the bottle), and check whether the running mechanical parts are stuck.