The maintenance method of automatic mask filling machine

- May 28, 2020-

                        The maintenance method of automatic mask filling machine

Automatic mask filling machine is one of the necessary equipment for the production and processing of facial mask manufacturers. The effect is getting bigger and bigger in our daily life. Therefore, many enterprises need to buy automatic mask filling machine to assist in the production.

Push the switch below the liquid storage bucket to the open position, so that the material can flow into the total metering pump. Adjust the screws on the crank according to the total volume of each container filled. Turn the knob of the filling speeder board to about 20 degrees, and then push the switch on the filling speeder board to the open position.After the automatic mask filling machine is installed, the filling track and the bottle-receiving plate are adjusted to the level, the liquid storage barrel is filled with materials, and all the electrical switches are in the closed position.

After the use of the automatic mask filling machine, pay attention to its maintenance. When the piston is removed and cleaned during the maintenance, the fixing screws should be removed together, so as not to affect the process requirements of the other when the di is removed.Before cleaning the piston type automatic mask filling machine, the remaining products should be removed clean, automatic mask filling machine and then fill the barrel with soft cleaning liquid.The cylinder has been lubricated when leaving the factory, please do not open or add any lubricating oil, to ensure the appearance of the three-in-one filling machine is clean and sanitary, and the power will be cut off when not working.The filling method of automatic mask filling machine is isobaric rotary filling, the filling valve is specially designed, the filling speed is fast and stable, and the efficiency is high.The sealing part is automatically covered and sealed.On the basis of the three-in-one small bottled water has been improved, which integrates bottle washing, filling and sealing, and is not used in the traditional straight-line filling method for large bottles. It has improved the degree of automation, reduced the floor area, reduced the number of operation personnel and reduced the labor cost.