This antibacterial gel making machine is mainly composed of mixing, dissolving, uniform mixing and mixing of different materials such as mixed and mixed products of mixing materials. Electric control, temperature control, operating platform and other functions in one. It is the very suitable making machine to make antibacterial gel. The material contact part is made of SUS316 stainless steel material, which makes the product comply with GMP regulations. The surface of the pot body and pipes are mirror polished.
Technical parameter
Model | Working capacity | blending power (KW) | blending rotation speed (r/min) |
JT-50 | 50L | 0.75 | 0-65 |
JT-100 | 100L | 1.5 | 0-65 |
JT-150 | 150L | 1.5 | 0-65 |
JT-200 | 200L | 1.5 | 0-65 |
JT-300 | 300L | 1.5 | 0-65 |
JT-500 | 500L | 2.2 | 0-65 |
JT-1000 | 1000L | 4 | 0-65 |
JT-1500 | 1500L | 4.5 | 0-65 |
JT-2000 | 2000L | 5.5 | 0-65 |
JT-3000 | 3000L | 7.5 | 0-65 |
JT-5000 | 5000L | 11 | 0-65 |
Performance and Features
The main stirring of antibacterial gel making machine adopts frequency conversion variable speed device to reduce the formation of bubbles when the temperature is low and the consistency is high.
High-speed homogenizer, strong mixing of solid liquid raw materials, can quickly dissolve AES / AESA / LSA and other incompatible materials in production, saving energy consumption and greatly shortening the production cycle.
The pot body of antibacterial gel making machine is welded with three layers of stainless steel plates, and the tank body and pipes are mirror polished, which fully meets the GMP requirements. According to the process requirements, the tank body can heat and cool the materials.
The heating methods of antibacterial gel making machine are mainly steam and electric heating. It is easy to discharge, and it can be discharged directly or with a delivery pump.
The stainless steel electric control cabinet of antibacterial gel making machine can fully monitor the operation of the equipment, and can display data such as temperature and stirring speed.
After the materials are mixed for mixing reaction, the center of the upper part of the stirring pot is stirred, and the Teflon scraper always caters to the shape of the stirring pot, and the wall-mounted adhesive is cleaned, so that the scraped material continuously produces a new interface, and then passes through the blade Shearing, compressing and folding, making it stir, mix and flow down to the homogenizer below the pot body, the material then passes through the strong shearing, impact and chaos generated between the high-speed rotating cutting wheel and the fixed cutting sleeve Flow and other processes, the material is cut in the shearing slit and quickly broken into 200um-0.2um particles, thereby ensuring that high-quality products with rich gloss, fineness and good ductility can be produced.
The stainless steel timing device is mainly used, which reduces the bubbles generated under low temperature and high viscosity conditions, and reduces the generation of bubbles.
The machine has an advanced scraper mixer, working eccentrically, and the PTPE (F4) composite board correctly contacts the boiler, which solves the problem of material adhesion. The ideal stepless speed regulation device can adjust the speed in the range of 0-65rpm at will.
The homogenizer is adopted from the advanced homogenization system of the American ROSS company. The homogenizer is installed at the bottom of the machine to ensure uniform and homogeneous materials, even if the productivity is low.
