The pot body is made of high-quality stainless steel plate stamping and welding. The emulsification process of the emulsifier is carried out under the condition of full sealing, which effectively prevents the pollution of dust and microorganisms. The lid of the pot is automatically lifted, and the material in the water pot and the oil pan is transported. The pipeline can be directly sucked into the emulsification pot under vacuum condition. The discharging method is that the emulsifier pot body is inverted and tiltable, and the heat medium in the pot interlayer is heated by the electric heating tube to achieve heating of the material, and the heating temperature is arbitrarily set. Automatic control. The cooling water can be added to the interlayer to cool the material, and the operation is simple and convenient, and an insulation layer is arranged outside the interlayer. Homogeneous agitation and paddle agitation can be used separately or simultaneously. Material micronization, emulsification, mixing, homogenization, dispersion, etc. can be completed in a short time. The material in the pot is emulsified by high-speed internal circulation shear mixing of the homogenizer, the opposite direction is stirred, the clockwise frame is scraped and the mixture is stirred counterclockwise, and the scraper stirrer generates centrifugal action during operation to make the tetrafluoro scraper Close to the pot wall, effectively solve the problem of the wall wall dip, without leaving a dead angle, the ideal frequency conversion speed device can make its speed arbitrary stepless speed regulation.
The device is equipped with a unique one-piece mirror device on the lid, equipped with a closed lighting for the operator to observe the emulsification of the material at any time. The whole set of structure is three-jacket, the equipment heating and cooling are completed in the same jacket, and the outer layer of the jacket has aluminum silicate insulation layer, which can prevent the operator from being burned and ensure the production safety. Secondly, the pot body is equipped with cooling water inlet and outlet. The lid is equipped with a variety of quick-loading interfaces, which can be selected by the user (sterile air breathing apparatus, material suction port, vacuum pump port, cleaning ball, CPI interface, trace element inlet, integral mirror window, vacuum gauge). The contact with the material is made of high quality stainless steel (medical made of 316L material, the inner surface is mirror polished, the vacuum mixing device is hygienic and clean, and the sanitary standard is GMP-compliant)