The double screw cone mixer uses the outer belt to drive the material from both ends to the center, while the inner belt pushes the material from the center to the ends, so the material achieves a high mixing effect in a short time.
Technical paramter
Model | Total volume (m3) | Load factor | Output (t/h) | Power (kw) | Feed size (mesh) | Revolution (rpm) | Rotation (rpm) |
SHJ-03CP | 0.3 | 0.6 | 0.3-1 | 2.2 | 20-450 | 2 | 143 |
SHJ-05CP | 0.5 | 0.6 | 0.5-1 | 3 | 20-450 | 2 | 143 |
SHJ-01CP | 1 | 0.6 | 2-2.5 | 4 | 20-450 | 2 | 57 |
SHJ-1.5CP | 1.5 | 0.6 | 2-4 | 5.5 | 20-450 | 2 | 57 |
SHJ-2CP | 2 | 0.6 | 2.5-5 | 5.5 | 20-450 | 2 | 57 |
SHJ-3CP | 3 | 0.6 | 3.5-8 | 7.5 | 20-450 | 2 | 57 |
SHJ-4CP | 4 | 0.6 | 5-10 | 11 | 20-450 | 2 | 57 |
Performance and features
The rotation and rotation of the double screw cone mixer is controlled by a set of motors and a cycloid pin wheel deceleration device. The mixer has the characteristics of rapid mixing and wide grinding.
The rotating arm will slowly rotate along the cylinder wall, pushing materials that have not yet entered the spiral into the studs of different heights, so that the materials in the cylinder can be stirred and agitated in all directions. , To speed up the renewal and diffusion of materials.
SHJ series double screw cone mixer is a convection batch mixer, specially designed for isolated, free-flowing powders and materials. It is known for its low-intensity mixing and the highest level of mixing precision without causing product distortion.
High quality motor
Motor with high quality.
Discharge device
The standard device usually uses a quincunx-shaped "off-position valve", which is tightly engaged with the bottom of the long screw to effectively reduce the mixing dead angle through manual and pneumatic driving methods. According to user requirements, butterfly valve, ball valve, star discharge device, side discharge, etc. can also be used.
Mixing equipment
The standard double screw cone mixer is equipped with two stirring augers, but in fact it uses single (long screw), double (two asymmetric screws of different lengths) or triple (three symmetrical screws, two long and short The screw is based on the size of the equipment; theoretically speaking, there are more angles of auger, the better the mixing effect.
Applications
This machine is widely used in powder, powder (solid-solid), powder, liquid (solid-liquid), liquid (solid-solid), powder, liquid (solid-liquid), and other industries in the chemical, pharmaceutical, food, biotechnology, health care, fertilizer, dye, chemical, pharmaceutical, chemical, pharmaceutical and other industries Mix with liquid (liquid-liquid). pigment, Metallurgy, mining, building materials, plastics and other industries.
