This cosmetic emulsion vacuum mixer tank is used for produce the cream, lotion, paste, ointment, paste, conditioner, etc. And the vacuum system is the key design of the machine, which can not only prevent the powder flying, but also can make the product without bubbles. The cosmetic emulsion vacuum mixer tank is the best machine to make high quality products. And The mixer has a great effective to the high base viscosity and solid content materials. The homogenizer adopts the Siemens motor to avoid breakage or damage of the homogenizer when working for the high viscosity products.
The Technical Parameter Of Cosmetic Emulsion Vacuum Mixer Tank
| Model | Capacity(L) | Mixing power(kw) |
| JT-E-20 | 20 | 0.37 |
| JT-E-50 | 50 | 0.37 |
| JT-E-100 | 100 | 1.5 |
| JT-E-150 | 150 | 1.5 |
| JT-E-200 | 200 | 1.5 |
| JT-E-350 | 350 | 2.2 |
| JT-E-500 | 500 | 2.2 |
| Note: In case of inconformity of the data in the table due to technical improvement or customization, the real object shall prevail. | ||
Mixing speed (r/min) | Homogenizing power(kw) | Homogenizing speed (r/min) |
0-63 | 0.75 | 0-3000 |
0-63 | 2.2 | 0-3000 |
0-63 | 3 | 0-3000 |
0-63 | 3 | 0-3000 |
0-63 | 4 | 0-3000 |
0-63 | 4 | 0-3000 |
0-63 | 5.5 | 0-3000 |
The Characteristics Of Cosmetic Emulsion Vacuum Mixer Tank
1. Mixing ways of the cosmetic emulsion vacuum mixer tank: Single-way mixing, double-way mixing or helical ribbon mixing.
2. The lifting systems of the cosmetic emulsion vacuum mixer tank: Single-cylinder lifting or double-cylinder lifting.
3. The homogenizing systems of the cosmetic emulsion vacuum mixer tank: upper homogenization, lower homogenization, internal and external circulating homogenization.
4. The heating methods: steam heating or electric heating.
5. The layer of the cosmetic emulsion vacuum mixer tank: Single layer or jacket layer.
6. The control ways of the cosmetic emulsion vacuum mixer tank: PLC control or Button control.
7. Feeding materials Ways: The material can be directly suck into the main pot by pipeline in a vacuum state or Feed pot can automatic up or down to pull materials into the tank.
8. Discharging way of the cosmetic emulsion vacuum mixer tank: The bottom of the pot switch valve discharging or tilt to discharge.
PLC touch screen control panel
The PLC control panel display automatic of mixing, homogenizing, emulsifying, vacuum, heating and cooling.
Button control
All function of the machine such as mixing, homogenizing, lifting and others will be display on the button control.
Mixing and homogenizing
single direction mixing or double direction mixing, top homogenizier or bottom homogenizer for choose.
Lid of the main pot
There are Material suction inlet, vacuum pressure gauge, vacuum port, Vent filter, Positive pressure inlet, Perfume hopper, CIP spray ball
LED Light, Sight window.
