The introduction of high shear rotor stator mixer
The high shear rotor stator mixer is composed of water pot, oil pot, emulsifying pot, operation platform, vacuum system, lifting system, electric control( plc optional) etc. The whole process including vacuum material suction and vacuum defoaming can be completed under the vacuum status without cellular contamination, and thus prolonging shelf life of products.
|Model||Capacity(L)||Mixing power(kw)||Mixing speed (r/min)||Homogenizing power(kw)||Homogenizing speed (r/min)||Heating method|
|JT-E-20||20||0.37||0-40||0.75||0-3000||steam heating or electric heating (optional)|
|Note: In case of inconformity of the data in the table due to technical improvement or customization, the real object shall prevail.|
1. Electric cabinet can get all controls for power, temperature display, controlling voltage, current, and frequency together. Therefore, the homogenization machine setting has a reasonable combination. The operation is easy to learn.
2. All tanks have 3 layers. The middle and outer layers are made from high quality SS304L. The inner layer that contacts the material is made from stainless steel SS316. Internal and external surface is treated by fine polishing which is safe and good looking.
3. The homogenizing structure made through German technology adopts the imported double-end mechanical seal effect. The maximum emulsifying rotation speed can reach 3600rpm and the highest shearing fineness can reach 0.2-5 μm.
4. For the heating system, you can choose the steam heating or electric heating.
5. The oil tank and water tanks are equipped with rating stirring dispersion device, so that oil and water could be heated more quickly and evenly.
6. The lid is with a light observation hole, which can keep control of the material emulsification situation in the kettle. There is a small material entrance, which is convenient to add special essence into the kettle.
7. Bottom material discharging is easy to operate. The finished materials can be directly moved into the filling and packing system. The materials can also be dumped out, which is easy to clean.
The lift-type machine was design by Yuhang Machinery in order to suit for all kinds of cream& paste material with high viscocity in industres line of cosmetic, daily-use commodity and pharmacy, medicine and food industries such as skin cream, BB cream, shampoo, ultrasound gel, wax, ointment, detergent, honey, sauce, serum and ointment etc .
The raw material (similar to same viscosity of cream and paste ) will be completely mixed with mixing system : The molecule of raw material will be high sheared and cracked by the gap beteween rotor and stator of homogenizer that will make the granual material to be tiny and exquisite material gradually . the liquidity of raw material will be increased. A effective molecule combination with this rebuilding shearing process. The smoothness of granule below 2um.