The main body of the pharmaceutical ointment vacuum mixer machine is made of stainless steel 304 and the contact surface is made of stainless steel 316L, which not only meet the requirements of the food grade of some products. And the utility model not only meet the requirements of the food grade, but also make the machine more durable and rust proof. Pharmaceutical ointment vacuum mixer machine is widely for cosmetic, daily chemical, pharmaceutical etc. industry chemical industry concerned with products for daily use,medicine,food and chemical industry.
The Technical Parameter Of Pharmaceutical Ointment Vacuum Mixer Machine
|Model||Capacity(L)||Mixing power(kw)||Mixing speed (r/min)||Homogenizing power(kw)||Homogenizing speed (r/min)||Heating method|
|JT-E-20||20||0.37||0-40||0.75||0-3000||steam heating or electric heating (optional)|
|Note: In case of inconformity of the data in the table due to technical improvement or customization, the real object shall prevail.|
Performance and features
1. According to the customer's raw material production process, the emulsification pot of pharmaceutical ointment vacuum mixer machine can be heated. There is an insulation layer outside the heating layer of the emulsification pot, which can improve heating efficiency and ensure the safety of operators.
2. The structure of the oil pot and the water pot is the same. The heating interlayer of the oil pan and the water boiler is equipped with a safety valve. If the heating temperature is too high and the pressure in the interlayer is too high, the safety valve will work.(oil and water pot are the parts of the pharmaceutical ointment vacuum mixer machine)
3. The tank body is made of stainless steel with high mirror light, beautiful and attractive, easy to clean, disinfect and maintain. All fittings and pipes are made of sanitary stainless steel.
4. All parts in contact with the medium of the pharmaceutical ointment vacuum mixer machine are made of stainless steel 316, without any pollution to the products.
5. Homogeneous agitator is installed at the bottom, which can give full play to the effect of homogenization in small production and very little oil phase.
The agitating paddle stirs the material along the wall of the container, the speed is 0-65rpm, and is controlled by frequency conversion. The machine should adjust the speed according to different technical requirements.
The homogenizer adopts the most advanced homogenization technology in Germany, with unique structure, stable and reliable quality (speed: 0-4500rpm).
The main pot of the emulsification pot adopts a lifting system, which is easy to clean, and the cleaning effect is more obvious. The emulsification pot adopts inclined discharge. The pot body is welded with imported three-layer stainless steel plates.