Cosmetic equipment vacuum emulsifying mixer is suitable for making all kinds of cream, paste in the cosmetic industry. It is mostly suitable for high viscosity product. The homogenizing effect is perfect. A scraper is provided around the frame stirrer. The scraper serves to make the inner wall of the container and the material continually creates a new interface without leaving any dead ends. And First put the raw material which can dissolved into water into water pot, then heat it , and mix it Second: put the raw material which can dissolved into oil to oil pot, heat it and mix it, then suck both of the raw material into main pot, to homogenize the two material by homogenizer.
Technical Parameter of Cosmetic equipment vacuum emulsifying mixer
|Note: In case of inconformity of the data in the table due to technical improvement or customization, the real object shall prevail.|
Mixing speed (r/min)
Homogenizing speed (r/min)
The Characteristics Of Cosmetic equipment vacuum emulsifying mixer
1. Cosmetic equipment vacuum emulsifying mixer is controlled by computer touch-screen or button, integrated operation, with beautiful generous;
2. Provided with hydraulic system of cosmetic equipment vacuum emulsifying mixer, which can freely lift and lower the boiler cover and has such functions as boiler tilting;
3. The heating method can be chose to steam or electric heating according to customer requirements ;
4. Advanced homogenizer with unique structure and reliable sealing, and the emulsifying rotation speed of 0-3000 rpm;
5. The pot body of cosmetic equipment vacuum emulsifying mixer is welded by imported three-layer stainless steel plate;
6. The mixing systems of cosmetic equipment vacuum emulsifying mixer include single-way mixing,double-way mixing and helical ribbon mixing.
7. The lifting systems of cosmetic equipment vacuum emulsifying mixer includes single-cylinder lifting and double-cylinder lifting. Varies high quality products can be customized according to customer 's requirements.
Mixer paddle with high temperature resistant PTFE scraper.
Lid of the main pot
There is an observation hole on the lid, which can observe the emulsification of the material in the kettle. There is a small material inlet, which is convenient for adding special flavors to the kettle.
The bottom material discharge is easy to operate. The finished material can be moved directly into the filling and packaging system. The material can also be poured out and is easy to clean.
Homogenizer is installed on tank bottom to increase motor power more thoroughly and strongly. It uses advanced German technology, with unique structure.