With the progress of the times, the demand for various cosmetics, skin care products, as well as pharmaceutical and food products is increasing, and the quality requirements are becoming higher and higher. But there are two main problem to make the high quality product, one is the dispersed phase partical size is too large a everywhere emulsion instability, lack luster; and another problem is mixing the air mixed with products, and the products into the air will make the products bubble, bacterial contamination, easy oxidation and the appearance is not smooth. These two problem will make the products very roughly. For these two questions, we developed the hydraulic vacuum emulsifier cream mixer to fix it. Our high quality mixer blade agitator, scraping the wall, and the center has stirred their complement each other, are combined into a mixing the best way to achieve the perfect mixed products. By vacuum pump sucking the materials, so that the powder will not fly through all the tank, and the mixing process of without bubbles, which can produce shiny, delicate and good ductility of high quality products.
The Technical parameter Of hydraulic vacuum emulsifier cream mixer
Model | Tank Capacity (L) | Homogenizing speed(rpm) |
JT-10 | 10 | 1440/3600 |
JT-30 | 30 | 1440/3600 |
JT-50 | 50 | 1440/3600 |
JT-100 | 100 | 1440/3600 |
JT-150 | 150 | 1440/3600 |
JT-200 | 200 | 1440/3600 |
JT -350 | 350 | 1440/3600 |
JT -500 | 500 | 1440/3600 |
JT -1000 | 1000 | 1440/3600 |
Mixing speed(rpm) | Power(kw) | Vacuum Supply(MPA) |
0-63 | 0.55-1 | -0.09 |
0-63 | 0.75-2 | -0.09 |
0-63 | 1.1-2 | -0.09 |
0-63 | 1.1-6 | -0.09 |
0-63 | 1.1-6 | -0.09 |
0-63 | 2.2-12 | -0.09 |
0-63 | 2.2-12 | -0.09 |
0-63 | 4-18 | -0.09 |
0-63 | 4-24 | -0.09 |
The Characteriatic Of hydraulic vacuum emulsifier cream mixer
1. Hydraulic vacuum emulsifier cream mixer can be used for vacuuming, heating, cooling, mixing, emulsifying, homogenizing, pressurizing process.
2. Suction of large amounts of powder directly into the homogenizer allows for shortest process times with maximun product quality.
3. The wall scrapers of hydraulic vacuum emulsifier cream mixer is used to remove wall residues.
4. The operation platform is very strong, is made of stainless steel 304, not easy to rust and very good bear heavy.
5. The lid of hydraulic vacuum emulsifier cream mixer can lift to outside of the pot, which is easy to clean and observe.
6. The oil and water phase mixers have exactly the same construction. There's a high speed disperser mounted from the top of the cover which helps dissolve the ingredients. Some customers will omit the oil and water phase mixers and keep the main emulsification machine only.
7. The speed of the homogenizer cutting head can reach 3600round/min. It has inside cutting shear knife and outside shear knife.
Emulsifying pot
The lid is automatically moved up and down. The material in the pot is sucked into the emulsifying pot through the conveying pipe under vacuum. The design of the emulsifying pot can be titrated to prevent dumping of the product. The material can be heated by an electric heater with the help of a heat transfer medium, or it can be heated by gas.
Homogenizer
The homogenizer adopts German advanced technology and a unique structure, so that the material forms a strong hydraulic shear force in the high-speed movement gap between the multilayer rotor and the stator, disperses the material, and produces centrifugal extrusion, grinding, and collision at the same time. Strength, the material is finally fully stirred, mixed and refined to meet the required requirements.
The lid of the main pot
Use a lid with an illuminated observation hole to keep track of the emulsification status of the pot product at any time. The material inlet is convenient for the process of adding special flavor, and the operation is convenient. The material can be discharged from the bottom of the pot, and it can be directly sent to the filling machine through a pipe for distribution, or it can be discharged again for cleaning.