The water plant purifying machine is a membrane separation operation that separates the solvent from the solution under the drive of a pressure difference. Apply pressure to the fluid on the side of the membrane. When the pressure exceeds its osmotic pressure, the solvent will reverse the osmosis in the direction of natural osmosis. Therefore, a straight-through solvent is obtained on the low-pressure side of the membrane to permeate the liquid, and a concentrated solution is obtained on the high-pressure side as the concentrated liquid.
Technical parameter of water plant purifying machine
|Type||Productivity(T/H)||Power(KW)||Recycle Rate(%)||Outlet Water Inductivity (μS/CM)||Raw Water Inductivity (μS/CM)|
Sand filter: use stainless steel vessel as housing, fill quarts sand, it can filter big particles impurities, suspended substances, colloids etc.
Carbon filter: use stainless steel vessel as housing, fill activated carbon, remove color, odor, residual chlorine and organics substances.
Softener: adopt cation resin to soften water, cation resin will absorb Ca2+, Mg2+(main elements for composing scale), reduce hardness of raw water, system can make resin intelligently regenerate, recycling.
Ro membrane: the core part of pure water equipment, the production of high-purity water.
Raw water pump: provide needed pressure for every pretreatment filter.
Water tank: storage of tap water, to solve the problem of insufficient tap water pressure and the back booster pump due to the impact of insufficient water, reduce the failure rate.
EDI: make the water more pure, finished water conductivity is less than 0.5 чs/cm.